Designed for challenging terrain, the Yanmar SA424 tractor has greater ground clearance and provides a rugged, stable platform for the work you need to do. Powered by a famously reliable Yanmar three-cylinder diesel engine, the SA424 delivers a unique combination of horsepower and fuel efficiency. And the new operator platform was designed with you in mind: It’s easier to climb on and off, the seat is more comfortable and every instrument and control is at your fingertips
Yanmar outfits the SA424 with a larger, more aggressive tire package, which increases ground clearance and provides more stability over the roughest parts of your property. The design also means you’ll operate with more comfort and confidence.
Here’s a quick look at SA424 features to help you get the most work done...
Hydrostatic transmission with dual pedals for simplified operation
Power takeoff (PTO) and three-point hitch for attachments
Lift 1,200 pounds – power typically found in larger tractors
Yanmar-designed YL210 front-end loader, with class-leading lift capacity of 1,200 pounds and a quick-attach system for buckets, forks and other attachments.
B65 Backhoe with 76” digging depth.
3-cylinder, 77.2 cu.in.
23.9 hp - Maximum Torque - 45.7 ft.lbs
Rated RPM - 3,200 RPM
PTO Power at Zero Speed - 21.7 HP
Engine Coolant - 3.0 qt.
Engine Oil - 3.6 qt.
Front Axle Oil - 0.92 gal.
Fuel tank - 6.1 gal.
Transmission Oil - 4.1 gal.
Selectable 2WD/4WD engagement
Hydrostatic transmission, 2 Range Speeds
Wet disc brakes
3-point hitch - Limited Category 1
3-point lift capacity at 24” - 1,209 lbf.
4-way loader control valve - Standard
Hydraulic Control System - Position Control, Open Center
Power steering - Fully Hydraulic
Pump capacity (implement) @ Rated - 3.7 GPM
Pump capacity (steering) @ Rated RPM - 4.3 GPM
System Pressure psi (MPa) - 2,429 psi
YL210 Curved Boom Loader
Maximum Lift Height to Pivot Pin - 79”
Maximum Lift Height Under Level Bucket - 58”
Reach at Maximum Lift Height - 36”
Reach with Bucket on Ground - 53”
Digging Depth - 100”
Maximum Drop Angle - 45°
Maximum Rollback Angle - 30°
Lift Capacity (Pivot Pin) - 1,199 lb.
Breakout Force (Pivot Pin) - 2,090 lb.
Rollback Force (Ground Line) - 1,518 lb.
Rated Flow - 4.3 GPM
System Pressure - 2,429 psi
Rising Time to Full Height w/o Load - 3.7 sec.
Lowering Time w/o Load - 2.3 sec.
Attachment Rollback Time - 2.3 sec.
Attachment Dumping Time (REGEN) - 1.6 sec.
Bucket Width - 53”
Bucket Capacity - 5.65 cu ft.
Bucket Weight - 136 lb.
Maximum Digging Depth - 76”
SwingArc - 150 degrees
Loading Height (bucket at 60 deg) - 62.4”
Reach from Center Line of Swing Pivot - 102”
Bucket Rotation - 180 degrees
Loading Reach (bucket at 60 deg) - 35”
Transport Overhang - 42.4”
Undercut - 25”
Stabilizer Spread, down position - 85.4”
Stabilizer Spread, up - 52.6”
Bucket Cylinder Digging Force - 2,800 lbs.
Dipperstick Cylinder Digging Force - 1,590 lbs.
Operating Pressure - 2,030 psi
Ground Clearance (with R4 Tires) - 9.8”
Minimum Turning Radius - 8.5 ft
Overall Height (with Folded ROPS, R4 Tires) - 71.8”
Overall height (with R4 Tires) - 87.2”
Overall Height (with R4 Tires, Top Of Steering Wheel) - 56.7”
Overall length (with 3PH and R4 Tires) - 105.8”
Weight (with ROPS, R4 Tires, Full Fluid) - 1,830 lb.
Wheelbase - 63.0”
Width (with R4 Tires) - 54.1”
Front Industrial (R4) - 23 x 8.50-12 4PR
Rear Industrial (R4) - 14-17.5 6PR
Front Turf (R3) - 24 x 8.50-14 4PR
Rear Turf (R3) - 36 x 14.00-15 4PR
Forward (with R1 Tires)-mph Low: 0-6.3, High: 0-13.1
Reverse (with R1 Tires)-mph Low: 0-4.3, High: 0-9.1
Mid Speed/Engine RPM - 2,057/3,200
Mid Type - Independent
Power Take Off (PTO) - 18.1HP
Rear Speed/Engine RPM - 554/3,200
Rear Type - Independent
Type - Hydraulic Clutch
Attachments - 1-year limited warranty
Power train (Engine and transmission core components) - 5 years or 2,500 hours
Tractor (Private Individual Usage) - 24 months or 2,000 hours