 |
|||
Return to the Bandit Chipper Selection Guide |
|||
Description |
1 | Specifications |
|
| A 15" drum-style chipper that chips like a disc. | 1 | Chipper: | 1 |
Features |
1 | Capacity - Diameter | 15" |
| The Bandit 37" oversized drum allows most of the | 1 | Feed System | Hydraulic |
| material to be chipped on the bottom half of the | 1 | Throat Opening - W x H | 20-1/2" x 17-1/4" |
| drum on an angle with the grain of the wood, | 1 | Cutting Drum - Dia. x W | 37" x 22" |
| similar to a disc, thus operating more efficiently. | 1 | Cutting Drum Knife Pockets | 4 |
| The oversized drum also results in less vibration | 1 | Knives - L x Thickness | 10" x 5/8 " |
| and lower fuel consumption than competitors' | 1 | Infeed Hopper - W x H | 29" x 54" |
| machines with 20" or 22-1/2" drums. Chips | 1 | Infeed Control Bar | Fwd./Neutral/Rev. |
| fibrous materials better than a disc style chipper | 1 | Feed Wheels (2) - Dia. x W | 10-5/8" x 20" |
| because the material enters the drum at a right | 1 | Feed Rate | 100 ft. per min. |
| angle. | 1 | Discharge Rotation | 360 Degrees |
| AUTO FEED PLUS- If the engine lugs to the point of | 1 | Chip Deflector |
12" |
| stalling, Auto-Feed Plus automatically stops the | A | Engine: | 1 |
| feed system and reverses the feed wheels to pull | 1 | Mfgr | Caterpillar |
| the wood out of the cut, which saves fuel, extends | 1 | H.P | 130 |
| knife life and provides faster engine recovery. | 1 | Model (tier 2) | 3054 ATAAC |
| FEED SYSTEM - A patented system provides down | 1 | Fuel | Diesel |
| pressure on the top feed wheel, adding crushing | 1 | Trailer/Frame: | 1 |
| power to feed wheels. The top feed wheel moves | 1 | Axle | 8000 lb Torflex |
| straight up and down in a trouble-free slide box | 1 | Tires | 215/75R X 17.5" |
| allowing for direct downward pressure on the | 1 | Rims | 8-bolt |
| material being shredded. | 1 | Tongue Jack | 5000 lb. capy. |
| DISCHARGE SYSTEM - Smooth transition from the | 1 | Brakes-w/breakaway actuator | Electric |
| chipper hood to the discharge allows the chips to | 1 | Lights | 12 V - LED |
| be thrown harder, fully loading trucks. Swiveling and | 1 | Dimensions and Capacities: | 1 |
| raising or lowering the chute and chip deflector are | 1 | Fuel Tank Capacity | 24-1/2 gal. |
| easily done from the ground. | 1 | Hydraulic Tank Capacity | 12 gal. |
| ALUMIMUM FENDERS are easily replaced. | 1 | Length - Infeed Tray Closed | 15' |
| DURABLE polyurethane paint finish. | 1 | Width | 7' |
Warranty |
1 | Height | 9' |
| General: 1 year or 2000 hours | 1 | Weight - Approx | 6700 lbs. |
| Structural Components: 3 years or 3000 hours | 1 | 1 | 1 |
| Sourced Components: Per Manufacturer's Warranty | 1 | 1 | 1 |
| 1 | |||
Home | Equipment Rentals | Event & Party Rentals |
| Specials | Used Equipment | New Equipment
| Parts | Equipment Service |
| About A to Z | Store Locations | Policies/F.A.Q. |
| Join the Team | Credit Application | Newsletter | Contact Us |
Designed and maintained by A to Z Equipment Rentals and Sales ©2007